| Customization: | Available |
|---|---|
| Color: | Red |
| Drying Time: | Standard Drying Time |
|
Still deciding? Get samples of US$ 1/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Techinical Data | |
| Usage | Be used as primer before using topcoat; or separately as rust conversion and anti-corrosion paint. |
| Product Color | Slightly reddish in opaque state. |
| Main Components | Water-based acrylic acid emulsion, corrosion inhibitors, water, and rust conversion agents. |
| PH | Weakly acidic |
| Formaldehyde Content | 0 |
| Benzene Content | 0 |
| Compatibility | Good compatibility, can be adapted to various topcoats. |
| Function | Convert rust,anti-rust protection |
| Theoretical Coverage Rate | 10-12m2/kg (Actual paint consumption may vary depending on the application method, surface roughness, and environmental conditions.) |
| Storage Conditions | 1.Keep the container tightly sealed. 2.Store in ventilated,dry and cool place at 5-35°C 3.Away from direct sunlight 4.Separately from strong acids, alkalis, oxidizing agents, food, and animal feed. |
| Instructions for Use | |
| Substrate Preparation | 1.For surfaces with severe rust and loose rust, remove the loose rust before applying the paint.Use water jet, steel brush, electric brush, or other tools to remove loosely adhered rust and foreign substances from the metal surface. 2.Oil-contaminated areas should be cleaned with degreaser. 3.For smooth and firmly adhered old paint surfaces, roughen the surface before painting. |
| Dilution Method | Before use, thoroughly stir the original paint from top to bottom. If the viscosity is too high, add a suitable amount of water. The amount of water added should not exceed 10%. Add water while stirring to ensure uniformity of the paint. Do not over-dilute, as it may result in sagging, loss of gloss, poor drying, and insufficient coverage of the paint film. |
| Application Conditions | 1.Do not apply in humid or cold weather conditions (temperature below 5°C or relative humidity above 85%), as it may not achieve the desired coating effect. 2.Use in well-ventilated areas. If working in enclosed spaces, install ventilation devices and use appropriate protective equipment. 3.Do not apply in rainy or snowy weather. |
| Application Method | 1.Can be applied by brush, roller, or spray. Apply multiple thin coats, avoiding applying a thick coat at once to prevent cracking of the paint film. If conditions permit, airless spraying or brush application is recommended for better rust conversion effect. 2.Depending on the degree of rust, apply 2-3 coats with an interval of at least 30 minutes between applications. Apply intermediate coats and topcoats after 24 hours. |
| Recoating Time | For high requirements and as an anti-corrosion coating, after applying one coat, wait for 30-60 minutes before applying another coat to achieve a uniform, dense, and glossy film for stronger corrosion resistance. |
| Curing Time | ≥7 days. In low-temperature environments (not below 5°C), the curing time should be appropriately extended to achieve the best paint film effect. |
| Tool Cleaning | During and after painting, clean all application tools promptly with water. If the paint is unused, not overly diluted, and uncontaminated, it can be poured back into the original sealed container for storage. If there are dry skins affecting use, filter the paint through a 100-mesh sieve before use. |
1.How can you prove that you are a paint manufacturer rather than a trading company?
As the one of The Top 5 paint manufacturer in China.We have many years of experience since 1996 in production and export,welcome to visit our factory at any time.
2.How about the price ?
We can offer the best wholesale price which depend on the quantity of the order.
3.I need to make sure the quality and the color .
Our pleasure!We can offer the liquid Free sample for you to test and color chart.
4.If the product is not ideal, what can we do?
We have perfect after-sales service to help to complete the construction smoothly.Even if there are any unexpected things in your order, we will assist to solve them.
5.What's your MOQ (min order quantity),production period and delivery time?
Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.
6.I want to put my Logo on the packing .
We can accept the OEM, waiting for your details requirement.
){kind=link}