Maydos Flat Emulsion Acrylic Latex Wall Paint with High Quality

• Customization: Available
• Color: White
• Appearance: Liquid
• Model NO.: M 2598
• Main Raw Material: Acrylic
• Method: Roller
• Level: Primer
• Drying Method: Air Drying
• Certification: ISO14001, CCC, RoHS, ISO9001
• Substrate: Skim Coat
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Gloss: Matt(5-6% on a 60°meter)
• Viscosity: 100-110ku
• Maximum Voc Content: 50g/L
• Special Gravity: Approximately 1.47-1.50kg/L
• Solid Content (by Weight): ≥56%(Standard Sample)
• Recommended Film Thickness Per Coat: Wet: 80μm Dry: 35μm
• Theoretical Coverage Per Coat: 8-12m2/Kg/Coat
• Transport Package: 4L, 18L and 20L
• Specification: 4L, 18L and 20L
• Trademark: Maydos
• Origin: China
• HS Code: 3209909090

Product Description

Maydos Flat Interior Emulsion Paint is the most advanced emulsion paint with outstanding and all-around multiple functions to resolve most of the common wall problems.
 

Maydos Fast Drying Emulsion One Coat Paint

Product Description

Features:
1. High performance but low price                
2. Strong hiding power
3. Easy application
4. Good leveling property     

Advantages:
1.Wide coverage: High spread rate which will save paint consumption.
2.Good hiding power: The paint can achieve a smooth finish which can hide the small flaws, cracks and seams of the wall.
3.Easy handling: Easy application with brush or roller and fast drying speed.
4.Eco-label qualification: Environmental friendly formula provides you a delicatesurface with no irritation and fresh odor.

Product Parameters

Technical Indexes

Appearance	White uniform viscous liquid
Gloss	Matt
Solids content	57.86±2%
Specific gravity	1.493±0.05
VOC	<50g/L
Contrast ratio	> 0.90
Alkali resistance (24 h)	Coating no changes
Emulsion ratio	11%~15%
Stability ( -5ºC)	No Degenerating
Scrubbing resistance	> 5000 times
Pigment	Non-lead pigment
Binder	Acrylic copolymer
Solvent	Water
Application method	Brush   Roller   Spray guns
Theoretical coverage	8~10/ kg / coat
Mixing ration with water	10% ~ 15% of water
Touch drying / Recoat  time	25 min/ 25ºC / At least 2 hours
Application environment	Humidity ≤85% , temperature ≥5ºC
Tools clean	Clean the tools with water
Storage	Cold & dry places, avoid freezing
Packing	5L=6kg   18L=22kg

 

Technical data
MODEL	1900	2900	5900
Gloss & Color	Matt , White and Colors
Viscosity	99-105 KU	95-105 KU	95-105 KU
Solid Content	=50%	=62%	=53%
Density	1.46-1.47 kg/L	1.46-1.47 kg/L	1.32-1.41 kg/L
Max VOC Content	60g/L	60g/L	70g/L
Theoretical coverage per coat	8-10m^2/kg/coat	8-10m^2/kg/coat	8-10m^2/kg/coat
Recommended film thickness	Wet:80μm/Dry:30μm	Wet:80μm/Dry:35μm	Wet:80μm/Dry:43μm

 

Applications

Typical Painting System

SURFACE	SYSTEM
Normal, Sound Surface	Primer: Maydos Anti-alkali Primer W1210 (1 coat) Topcoat: Maydos Interior High-Class Emulsion Wall Paint AN3006 (2 coats)

 

Surface Preparation

Surfaces must be thoroughly clean, dry and free from all loose dirt, chalk or powder. New surfaces such as plaster and concrete should be fully dry before painting.

New Wall	1. Fresh concrete must cure at least 30 days and meet application requirement before  plastering. 2. The plaster must not be too soft. Sand and dust off after dry. 3. To resist alkalis and to obtain best results first apply one coat of Maydos   anti-alkali primer W1210
Previously Painted Surface	1. Remove powdery or flaking paint by scraping followed by using a suitable abrasive paper  and dusting off. 2. Fill the defects with proper filler 3. To seal powdery surfaces and to obtain best results first apply one coat of Maydos  anti-alkali primer W1210
Fungus Growth Wall	1. Remove all the fungus by scraping followed by using a suitable abrasive paper and dusting off 2. Wash the surface with appropriate fungus washing. Rinse with clean water and wait till dry 3. To obtain best results first apply one coat of Maydos anti-alkali primer W1210

 

Notes for use:

1.Mix well after paint can is opened.

2.To prevent hardening of the paint, the can should be closed during the interval of application. Thinned paint should not be poured back to the original can.

3.Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long 

4.Stop application when temperature is below 10ºC, or humidity over 85%.

5. Apply with Maydos matching primer for best performance.

6. For information of Manufacture Date, Lot No., Net weight and Expiring Date, please refer to the product label. 
 

Proposed procedure application:

Check-Cover-Clean-Filler-Sanding-Primer-Finish

Concrete base - Putty (Two layers) - Primer (One layer) - Paint (Two layers)

 

Comparision

We own professional laboratory toinspect each property of paint, welcome to send sample to us for inspection.

 

Package

 

Package: 4L / 5L / 18L / 20L

 

 

 

Company Profile

Guangdong Maydos Building Materials Limited Company,established in 1997, is one of the top 100 chemical enterprises in China. It is located in Foshan ,China with convenient transportation access.Maydos is a professional manufacturer enagaged in the development ,production,sale and service of paints and adhlesive. We offer high quality Wood Paint, Emulsion Paint, Chloroprene Rubber Adhesive, SBS Adhesive, PU Adhesive, Hot-melt Glue, Emulsion Glue,and Epoxy Floor Paint ects.

1.ISO14025 Ecolabelling certificate, ISO9001, ISO14001 approved enterprise
2.Starts international business since 2005.
3.Exported over 30 countries in Europe, Asia, Africa, Oceania and America.
4.Sales revenues grow by 500% in 2007.
5.Part of China's top 5 chemical groups , Guangdong Maydos Group
6.Welcome OEM and ODM orders
 

FAQ

1.How can you prove that you are a paint manufacturer rather than a trading company?
    As the one of The Top 5 paint manufacturer in China.We have many years of experience  since 1996 in production and export,welcome to visit our factory at any time.

2.How about the price ?
    We can offer the best wholesale price which depend on the quantity of the order.

3.I need to make sure the quality and the color .
   Our pleasure!We can offer the liquid Free sample for you to test and color chart.

4.If the product is not ideal, what can we do?
   We have perfect after-sales service to help to complete the construction smoothly.
   Even if there are any unexpected things in your order, we will assist to solve them.

5.What's your MOQ (min order quantity),production period and delivery time?
   Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.

6.I want to put my Logo on the packing .
   We can accept the OEM, waiting for your details requirement.