Profession Since 1995-Maydos One Pack Nitrocelullose Base Wood Lacquer (NC Paint)

• Customization: Available
• CAS No.: 9003-01-4
• Formula: Mixture
• EINECS: 79-65-7
• Color: Clear
• Appearance: Liquid
• Main Raw Material: Nitrocellulose
• Method: Spray
• Level: Primer
• Certification: ISO9001
• Substrate: Wood
• Components: Solvent
• Paint Film Property: Decoration
• Formation Mechanism: Conversion Type
• Colors: Base on Color Chart
• Hardeness: 3h
• Smell: Low
• Transport Package: 1, 4, 18, 20L
• Specification: 1, 4, 18, 20L
• Trademark: Maydos
• Origin: China
• Production Capacity: 6, 000 Tons/Month

Product Description

Nitrocellulose wood varnish
Model: M8100(glossy) M8103(matt) M8105(scmi-glossy) M8100D(primer)

Technical data
Shelf Life	12 months (use up in 4 hrs after mixing)
Gloss	Glossy, Matt, Semi-glossy
Solids content (Finish):	35-40%
Solids content (Primer)	40-45%
Theoretical Coverage:	Finish: 12-15m^2/kg/coat Primer: 12-15m^2/kg/coat
Drying: (25ºC , relative humidity 60%)	Touch Dry: 30 minutes Hard Dry. 7 days Recoat time: 4 hours
Application Method:	Brush, Roller, Spraying gun
Recommended Paint System:	2 coats of Maydos transparent putty for patching imperfection 1 coat of Maydos water-based wood varnish primer. 2 coats of Maydos water-based wood finish
Clean up:	Clean all equipment with clean water immediately after use
Storage:	Store in cool(temperature range 5°C-45ºC), dry and well-ventilated place and keep it out of the reach of children.

Description
Maydos Nitrocellulose Based One Pack Wood Varnish (lacquer) is developed for many usages over any wood. lt mainly made for African market base on its viscosity and quality. Till now, more than 7 African countries accept this products. It is suitable for interior wood furniture, bamboo or cane products and it can show a clear crystal appearance with different sheen. Pure quality of materials without foreign particles ensures the performance of decoration.

Advantages

1. No need hardeners, ensure your health;
2. Special yellowing resistant formula which preserves gloss;
3. Fast surface drying speed which saves labor and time;
4.Good leveling property, easy application and repair.

Applications

Instructions/application recommendation of painting system:
1. Make sure all the surfaces are clean, dry and free from wax, grese, oil, etc;
2. For bare wood, sand it down in the direction of the grain until it's smooth. Start with 80# sandpaper, and then 150# and finally 220#. Use clean cloth to remove dust between sandings.
3. If you are using paint as the topcoat over another finish, sand the existing finish first with steel wool or synthetic steel wool.
4. Apply a thin coat of paint on the wood and allow it to dry completely. After the first coat is dry, sand it lightly with fine abrasive paper to remove any raised grain.
5. Brush or spray another coat of paint and allow it to dry.
6. Continue to apply coats of paint until you achieve the surface build-up that you desire.
7. Check the finish to see whether there are small nicks or imperfections. Rub out any rough spots with (synthetic) steel wool. Wipe with a clean tack cloth to remove dust. For extra protection, Polish the surface with wax or furniture Polish.

Application Notice:
1. Application methods: Roller, brush or spray.
2. Mixing ratio of matched thinner as below:

Model	Base	Thinner	Mixing Ration Base: Thinner
M8100	Nitrocellulose Varnish(Glossy)	GMX43	1: 1
M8103	Nitrocellulose Varnish(Semi-Gloss)	GMX43	1: 1
M8105	Nitrocellulose Varnish(Matt)	GMX43	1: 1
M8100D	Nitrocellulose Varnish(Primer)	GMX43	1: 1

3. Wear eye protector and rubber gloves to prevent exposure to paints;
4. This product is highly flammable liquid. Please pay special attention to protecting yourself from sensitization by inhalation or skin contact;
5. This product is for professional use only;
6. More information like manufacture date, Lot No., Net content, Expiring Date and so on, please refer to the product label.

Detailed Photos

                                                      Wood paint package

                                                   Wood paint color chart

Company Profile

Guangdong Maydos Building Materials Limited Company, is located in Shunde district, Foshan, Guangdong province, only 40 minutes′ drive from Guangzhou, and after more than fourteen years′ endeavour, it now becomes one of the top 100 chemical enterprises in China. Maydos is mainly specialized in manufacture of high quality Wood Paint, Emulsion Paint, Chloroprene Rubber Adhesive, SBS Adhesive, PU Adhesive, Hot-melt Glue, Emulsion Glue, and Epoxy Floor Paint.

1. ISO14025 Ecolabelling certificate, ISO9001, ISO14001 approved enterprise
2. Starts international business since 2005.
3. Exported over 112 countries in Europe, Asia, Africa, Oceania and America.
4. Sales revenues grow by 500% in 2007.
5. Part of China's top 5 chemical groups , Guangdong Maydos Group

FAQ

1.How can you prove that you are a paint manufacturer rather than a trading company?
    As the one of The Top 5 paint manufacturer in China.We have many years of experience  since 1996 in production and export,welcome to visit our factory at any time.

2.How about the price ?
    We can offer the best wholesale price which depend on the quantity of the order.

3.I need to make sure the quality and the color .
   Our pleasure!We can offer the liquid Free sample for you to test and color chart.

4.If the product is not ideal, what can we do?
   We have perfect after-sales service to help to complete the construction smoothly.
   Even if there are any unexpected things in your order, we will assist to solve them.

5.What's your MOQ (min order quantity),production period and delivery time? 
   Our MOQ is 1000kg. We accept mixed order and the production period and delivery time are 7-10 days.

6.I want to put my Logo on the packing .
   We can accept the OEM, waiting for your details requirement.