Two-Coat System PTFE Nonstick Paint to Protect Cookware of Iron Steel Alloy Aluminum Ingot

• Customization: Available
• Color: Black
• Appearance: Liquid
• Main Raw Material: PTFE Resin
• Paint Film Property: Heat-Resisting Paint
• Method: Spray
• Level: Finish Coat
• Category: Organosilicon Heat-Resistant Lacquer
• Certification: ISO9001, ISO14001, CCC
• Substrate: Aluminum
• Components: Film Forming Matter
• Solid Content: 35%±2
• Viscosity: Nk-2 Cup 25°c / 15~30s
• Theoretical Spray Volume: 10m&Sup2
• Coloring Pigment: Coloring Pigment
• Water-Based Solvent: 24~42%
• Surfactant: 2~5%
• Cellulose Thickener: 1%
• Trademark: Maydos
• Origin: Guangdong, China

Product Description

Product Description

 

Features
This product has strong salt water resistance and corrosion resistance, high temperature steam corrosion resistance, strong  adhesion, very high hardness, very good friction resistance, high temperature resistance, good non-stickiness, etc., its color is rich, and at the same time maintains Water-based paint is environmentally friendly and healthy.

Where to Use
It is used in high temperature resistant coating, non-stick coating, anti-corrosion coating and
wear-resistant coating. It is suitable for products such as rice cooker, pressure cooker, aluminum pan, frying pan, frying pan and frying basket, various baking pans, Cake tray, iron and other products.

Technical Data
Parameter	Test Method	Standard Range
Solidcontent	280ºCx10min	50%±2
Viscosity	Use NK-2 cup x25°C (seconds)	9~12s
Theoretical spray volume	10um film thickness	8m2

How to use

1.The storage temperature of the paint is 5~40°C, which is the best in the 25°C environment avoiding direct sunlight. The cured ABC component should be used within 24 hours. Please calculate the amount reasonably. The unmixed paint can be stored for 6 months at rest. It is recommended to roll the component C once a month when it is not used for a long time. The unused paint should be stored in a low temperature environment in time.

 

2.Wear protective glasses during operation. In case of contact with eyes, rinse immediately with plenty of water for at least 15 minutes and send to the doctor.

 

3.Avoid skin contact during operation. In case of skin contact, wash thoroughly with soap and water. If tingling occurs, seek medical attention immediately

 

4. Keep adequate ventilation at the operation site to avoid inhalation of steam, fog or droplet. If inhaled, move to fresh air immediately.

 

5.Extinguishing method and extinguishing agent of paint: Carbon dioxide and dry powder.

 

6.Emergency treatment of leakage: Inert adsorption materials are used for plugging and removal, And dispose of the waste properly. If the heat exceeds the flash point more than 90°C), to remove the fire source.
 

 

Company Profile

Guangdong Maydos Building Materials Limited Company, is located in Foshan city, Guangdong province, only 40 minutes′ drive from Guangzhou.After more than fourteen years′ endeavour, it now becomes one of the top 100 chemical enterprises in China. Maydos is mainly specialized in manufacture of high quality Wood Paint, Emulsion Paint, Chloroprene Rubber Adhesive, SBS Adhesive, PU Adhesive, Hot-melt Glue, Emulsion Glue, and Epoxy Floor Paint,Car care products.

1. ISO14025 Ecolabelling certificate, ISO9001, ISO14001 approved enterprise
2. Starts international business since 2005.
3. Exported over 112 countries in Europe, Asia, Africa, Oceania and America.
4. Sales revenues grow by 500% in 2007.
5. Part of China's top 5 chemical groups , Guangdong Maydos Group

FAQ

1.How can you prove that you are a paint manufacturer rather than a trading company?
    As the one of The Top 5 paint manufacturer in China.We have many years of experience  since 1996 in production and export,welcome to visit our factory at any time.

2.How about the price ?
    We can offer the best wholesale price which depend on the quantity of the order.

3.I need to make sure the quality and the color .
   Our pleasure!We can offer the liquid Free sample for you to test and color chart.

4.If the product is not ideal, what can we do?
   We have perfect after-sales service to help to complete the construction smoothly.
   Even if there are any unexpected things in your order, we will assist to solve them.

5.I want to put my Logo on the packing .
   We can accept the OEM, waiting for your details requirement.