This environmental friendly, water base interior emulsion paint provides an excellent hide, wide coverage finish with fresh odor. It can be easily applied with brush or roller.
1.Wide coverage: High spread rate which will save paint consumption.
2.Good hiding power: The paint can achieve a smooth finish which can hide the small flaws, cracks and seams of the wall.
3.Easy handling: Easy application with brush or roller and fast drying speed.
4.Eco-label qualification: Environmental friendly formula provides you a delicate surface with no irritation and fresh odor.
Acrylic copolymer emulsion, pigment, additives and water.
Solvent Type: Water-base
Resin Type: Acrylic acid
Gloss: Matt(5~6% on a 60° meter)
Maximum VOC content: 50g/L
Specific Gravity: approximately 1.46-1.47kg/L
Solid Content (by weight): ≥56%(standard sample)
Recommended film thickness per coat:
Wet: 70μm Dry: 30μm
Theoretical coverage per coat: 10-14 m2/kg/coat
Average dry time at 77° F/25ºC:
To touch: 0.5-1 hours
Recoat: 2 hours
Dilution Ratio (%, with tap water): 20 (vary depending on application method)
Application Method: Brush, Roller, and Spray
Recommended Paint System:
2 coats of filler
1 coat of Maydos anti-alkali primer
2 coats of M9010 topcoats
1. Remove all loose or powdery paint residue by brushing and scraping with a stiff fiber brush
2. Fill any minor cracks with an appropriate filler
3. Surface should be flat and sanded smooth
Recoat interval should be over 2 hours (depend on touch dry).
Shelf Life: 30 months in sealed cans
Store in cool, dry and good ventilated place. Temperature range: 0ºC-35ºC.
Notes for use:
1. Mix well after paint can is opened.
2. To prevent hardening of the paint, the can should be closed during the interval of
application. Thinned paint should not be poured back to the original can.
3.Recoat interval should be prolonged in winter. To prevent the surface from erosion and avoid the precipitation of alkaline component, wall surface drying time should be relative long
4.Stop application when temperature is below 10ºC, or humidity over 85%.
5.Apply with Maydos matching primer for best performance.
6.For information of Manufacture Date, Lot No., Net weight and Expiring Date,please refer to the product label.
1.Use soap and water.
2.Clean all equipment with clean water immediately after use and prevent unused paint from freezing.