Maydos Nail-Free Adhesive (Superior)
Maydos Nail-Free Adhesive with extremely adhesive force and bonding ability, is aimed to replace the metallic nail as general-purpose adhesive,and it doesn't require drilling holes for fixing and bonding materials such as wood,MDF board,gypsum board,stone , concrete,
ceramics,metal,plastic,rubber and so on.
1. Super strong bonding property,extremely high bonding strength;
2. Large flexibility,no embrittlement,bonding power not affected by shrink of building;
3. Extensive application range,suitable for most of materials,even wet wood;
4. Can be used for filling gaps,cracks,no sink. Painting is no problem after adhesive dry;
5. Excellent weather-resistance, water-proof property;
6. Non-toxic,tasteless,no pollution, free of hazardous substances like Benzene,formaldehyde,etc
AppearanceHeavy paste,viscous liquid
OdorSolvent with low odor
ViscosityApprox.110,000 cps @ 25 C
Specific Gravity1.3 g/ml
Chemical ResistanceVery good
Application Temperature-20 C to + 50 C
Initial Contact Time3~10 minutes,depending on temp.
Open Time10~20 minutes,depending on temp.
Maximum Bond5~7 days depending on temp&thickness
Standard Package360g / 300ml per tube
Remind before application:
Always try small bonding as test before massive bonding.
1. Surface preparation: Bonding surface should be clean and free of dust and rust.
2. cut up the tube top, put the adhesive mouth,squeeze out the adhesive by sealing gun.
---Dry Bonding: (suitable for light materials & joints for light pressure)
Squeeze out the adhesive in form of "Z" ,line distance about 40cm. Apply to material A,then press to bonding area B lightly, wait for a few minutes about 5~8 minutes,then press the two surfaces with strong pressure.
---Wet Bonding: (Suitable for heavy materials)
Apply the adhesive same way as above,then clamp or fasten up the two materials by tools like pliers,screws to maintain maximum surface contact at bonded interfaces. Fix and wait for 24 hours till the adhesive dry,then remove the fixing tools. The adhesive is movable within 20 minutes since bonding. The adhesive becomes stronger 2~3 days after bonding, reaches best performance till 7 days.