Footwear Transparent Adhesive for Shoes

• Bonding Function: Structural Adhesive
• Morphology: Solvent
• Application: Footwear & Leather
• Material: Polyurethane
• Classification: Room Curing
• Main Agent Composition: Polyurethane Elastomer
• Model NO.: PU
• Characteristic: Weatherability
• Promoter Composition: Solvent
• Composition: Organic Material
• Color: Clear
• Solids Content: 13%-15%
• Specific Gravity: 0.85kg/L
• Packing: 0.7L, 1L, 3L, 4L, 15L, 18L and 200L
• Shelf Life: 12 Months Normally (Preferably No More Than 6 Mont
• Transport Package: 2.2kg/Tin, 3kg/Tin, 15kg/Tin, 180kg/Drum
• Trademark: Maydos
• Origin: China
• HS Code: 35069900
• Production Capacity: 30 Ton/Day

Product Description

Footwear transparent adhesive for shoes

Footwear adhesive(PU adhesive)

Product Description

Product description
Maydos PU Adhesive for Shoe-making is colorless and semi-transparent. It has such features as non-yellowing, easy application, rapid drying speed, powerful viscidity, ultraviolet radiation, aging and damping resistant after solidification. 

Where to use
Mainly used for PVC, PU, TPR, genuine leather, artificial leather, flannel, rubber, furniture, sports material etc. Better oil resistant performance, lower odor and shorter operation time than other brands of PU adhesive in the market and it is suitable for both assembly line and handwork.

Product Parameters

Model: PA01 (for assembly line) PA02 (for handwork) 

Product Data
Type	Polyurethane Base
Colour	Translucent Clear
Solvent	Ketone
Viscosity	1800-2100 mPa.s
Solids	0.14
Specific Gravity	0.86 g/cm^3
Cleaner	Maydos Solvent
Flammability	Highly flammable

 

Features

Features and benefits
1. Excellent oil resistant and anti-skidding performance 
2. Strong initial bonding force
3. Yellowing and freezing resistant
4. Low odor and good liquidity



Limitations
1. Not for use for bonding metals.
2. Do not use on expanded polystyrene foam.
3. Not suitable for polyethylene or polypropylene plastic.

 

Applications

 

Directions for use

Surface preparation the grease, smirch, rust, moisture of the contacted surface must be cleaned off, surface of bamboo, leather or rubber etc must be matted. 

Recommended apply system
Brushing	The effect will be better if stir thoroughly or make the pot inverted repeatedly in order to mix the glue before use. The contacted surface is brushed by the adhesive in thin layer, brushing toward a same aspect for air getting out to strengthen the powerful viscidity.
Airing	Wait for 5 to 25 minutes (25 Celsius) after brushing, until the condition is proper to agglutinate.
Contacting	Contacting is level one time because the viscidity is super powerful, add pressure or tapping for the super viscidity of continua adhesive.

Remark

The most suitable temperature and humidity for contacting (bonding): 20°C -30°C, humidity: 55%-75%

Adhesive contains VOC, easily burnt, keep away from fire. Make sure the construction site is well ventilated.

No. of Regulation On Transporting Dangerous Goods: 32196

Footwear Applications

1.For PU Leather

Roughed PU Leather→Apply PU Primer→
Dry for 2-3 mins at 55-60°C →Apply PU Adhesive
→Dry for 3-4 mins at 55-60°C  →Attaching within 1 minute→ Pressing: Pressure:35kg; Time: 10-12s→
Freezing: Temperature: 0°C; Time: 2-3 mins
 

2.For Oily Leather
Roughed Oily Leather→Apply Oil Leather Primer →
Dry for 3-4 mins at 55-60°C →Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→Attaching within 1 minute→
Pressing:  Pressure: 35kg ; Time: 10-12s→
Freezing:  Temperature: 0°C, Time: 2-3mins

 

3.For Leather
Roughed Leather→Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→ Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→
Attaching within 1 minute→
Pressing:  Pressure:35kg; Time: 10-12s→
Freezing:  Temperature: 0°C; Time: 2-3 mins

 

4. For Nylon fabric
Nylon Fabric →Apply Nylon Cloth Primer→
Dry for 8-10 mins at 60-65°C →
Apply PU Adhesive→Dry for 3-4 mins at 55-60°C→
Apply PU Adhesive→Dry for 3-4 mins at 55-60°C→
Attaching within 1 minute→
Pressing: Pressure: 35kg; Time: 10-12 s→
Freezing: Temperature: 0°C;Time: 2-3 mins
 

 

5.For TPU Units
Roughed TPU Units→Apply PU Primer →
Dry for 2-3 mins at 55-60°C →Apply PU Adhesive →
Dry for 3-4 mins at 55-60°C →Apply PU Adhesive →
Dry for 3-4 mins at 55-60°C →Attaching within 1 minute→ Pressing:  Pressure:35kg; Time: 10-12s →
Freezing: Temperature: 0 °C ;Time: 2-3 mins
 

 

6.For Rubber
Roughed Rubber →Apply Rubber Primer A/B→
Dry for 2-3 mins at 55-60°C→Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→ Attaching within 1 minute →
Pressing: Pressure:35kg; Time: 10-12s→
Freezing: Temperature: 0 °C; Time: 2-3 mins
 

 

7.For EVA Rubber
Roughed EVA Rubber→Apply EVA Primer→
Dry for 2-3 mins at 55-60°C→Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C →Apply PU Adhesive→
Dry for 3-4 mins at 55-60°C→Attaching within1 minute →
Pressing: Pressure:35kg; Time: 10-12s→
Freezing: Temperature: 0 °C; Time: 2-3mins
 

 

322

Product packaging

1L/3L/4L/18L

 

Company Profile

Guangdong Maydos Building Materials Limited Company,established in 1997, is of the top 100 chemical enterprises in China. It is located in Foshan ,China with convenient transportation access.Maydos is a professional manufacturer enagaged in the development ,production,sale and service of paints and adhlesive. We offer high quality Wood Paint, Emulsion Paint, Chloroprene Rubber Adhesive, SBS Adhesive, PU Adhesive, Hot-melt Glue, Emulsion Glue,and Epoxy Floor Paint ects.

1. ISO14025 Ecolabelling certificate, ISO9001, ISO14001 approved enterprise
2. Starts international business since 2005.
3. Exported over 30 countries in Europe, Asia, Africa, Oceania and America.
4. Sales revenues grow by 500% in 2007.
5. Part of China's top 5 chemical groups , Guangdong Maydos Group
6. Welcome OEM and ODM orders.

FAQ

1.How can you prove that you are a paint manufacturer rather than a trading company?
    As the one of The Top 5 paint manufacturer in China.We have many years of experience  since 1996 in production and export,welcome to visit our factory at any time.

2.How about the price ?
    We can offer the best wholesale price which depend on the quantity of the order.

3.I need to make sure the quality and the color .
   Our pleasure!We can offer the liquid Free sample for you to test and color chart.

4.If the product is not ideal, what can we do?
   We have perfect after-sales service to help to complete the construction smoothly.
   Even if there are any unexpected things in your order, we will assist to solve them.

5.What's your MOQ (min order quantity),production period and delivery time?
   Our MOQ is 200Kg. We accept mixed order and the production period and delivery time are 7-10 days.

6.I want to put my Logo on the packing .
   We can accept the OEM, waiting for your details requirement.